GE
-
GE Module IC693CPU351
The GE Fanuc IC693CPU351 is a CPU module with a single slot. The maximum power utilized by this module is 5V DC supply and the load required is 890 mA from the power supply. This module performs its function with a processing speed of 25 MHz and the type of processor used is 80386EX. Also, this module must operate within the ambient temperature range of 0°C –60 °C. This module is also provided with a built-in user memory of 240K bytes for entering programs into the module. The actual size available for user memory mainly depends on amounts allocated to %AI, %R and %AQ.
-
GE Input Module IC693MDL645
The IC693MDL645 is a 24-volt DC Positive/Negative Logic Input belonging to the 90-30 Series of Programmable Logic Controllers. It can be installed in any Series 90-30 PLC system that has either a 5 or 10 -slot baseplate. This input module has both positive and negative logic characteristics. It has 16 input points per group. It utilizes one common power terminal. The user has two options for powering field devices; either supply the power directly or use a compatible +24BDC supply.
-
GE Input Module IC670MDL240
The GE Fanuc IC670MDL240 module is a 120 Volts AC grouped input module. It belongs to the GE Field Control series manufactured by GE Fanuc and GE Intelligent Platforms. This module has 16 discrete input points in a single group, and it operates on 120 Volts AC rated voltage. Additionally, it features an input voltage ranging from 0 to 132 Volts AC with a frequency rating of 47 to 63 Hertz. The IC670MDL240 grouped input module has an input current of 15 milliamps per point when operating at 120 Volts AC voltage. This module has 1 LED indicator per input point to show the individual statuses for the points, as well as a “PWR” LED indicator to show the presence of the backplane power. It also features user input to frame ground isolation, group to group isolation, and user input to logic isolation rated at 250 Volts AC continuous and 1500 Volts AC for 1 minute. However, this module has no point to point isolation within a group.
-
GE CPU Module IC693CPU374
General: The GE Fanuc IC693CPU374 is a single-slot CPU module with a processor speed of 133 MHz. This module is embedded with an Ethernet interface.
-
GE Communications Module IC693CMM311
The GE Fanuc IC693CMM311 is a Communications Coprocessor Module. This component provides a high performance coprocessor for all Series 90-30 modular CPUs. It cannot be used with embedded CPUs. This covers models 311, 313, or 323. This module supports GE Fanuc CCM communications protocol, the SNP protocol and the RTU (Modbus) slave communications protocol.
-
GE Communications Module IC693CMM302
The GE Fanuc IC693CMM302 is an Enhanced Genius Communications Module. It is quite commonly know as GCM+ for short. This unit is an intelligent module which enables automatic global data communications between any Series 90-30 PLC and up to a maximum of 31 other devices. This is done on a Genius bus.
-
GE Battery Module IC695ACC302
The IC695ACC302 is an Auxiliary Smart Battery module from the GE Fanuc RX3i Series.
