Manufacturer AB Module 1746-HSRV
Product Specification
| Manufacturer | Allen-Bradley |
| Brand | Allen-Bradley |
| Part Number/Catalog No. | 1771-OBDS |
| Module Type | Digital DC Output Module |
| Number of Outputs | 16 Outputs |
| Voltage Category | 10-60 Volts DC, Source |
| DC Operating Voltage | 10-40 Volts |
| Backplane Current | 300 Miliamperes |
| Max Continuous Current Per Output | 1 Ampere |
| Max Continuous Current Per Module | 8 Amperes |
| Wiring Arm | 1771-WH |
| Coating | Conformal Coat |
| Data Format | BDC or Natural Binary |
| Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
| Typical DC Signal Delay (Off) | 50 ms |
| Wiring Arm | 1771-WH |
| Mounting | Rack Mountable |
About 1746-HSRV
The Allen Bradley 1771-OBDS is a DC Current Limiting Output module, which comes with 16 outputs. Its maximum on state voltage drop is 1.5 Volts, and its maximum off state leakage current is 0.5 mA per output.
The 1771-OBDS has a power dissipation of maximum 14 Watts and minimum 2 Watts; its thermal dissipation is 47.8 BTU/hour at its maximum and 6.9 BTU/hour at minimum.
With an operating temperature of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) and a nonoperating temperature of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit), this unit is capable of withstanding many different conditions. Additionally, the relative humidity of this unit can normally stay between 5% and 95% without condensation.
The Isolation voltage of this module has been tested to withstand 500 Volts for 60 seconds, while its ESD immunity is 4 kV contact discharges and 8 kV air discharges.
The 1771-OBDS is supplied as open type equipment, intended for use in industrial environments that do not exceed Pollution 2 (as defined in EN / IEC0664-1) when applied in a Zone 2 environment; additionally, the enclosure should be accessible only by means of the appliance. After checking the fuse, check the field wiring arm to be sure it is firmly in place. Do this before checking the status of the other indicators.
