Manufacturer GE CPU Module IC693CPU363

Short Description:

The GE Fanuc IC693CPU363 is a Module of GE Fanuc series 90-30 PLC systems. It connects to one of the CPU slots on a baseplate. This CPU is of type 80386X and has a speed of 25Mz. It gives the baseplate the ability to connect to up to seven remote or expansion baseplates. The power required for it to work is +5VDC and 890mA current. It has a battery to back up a clock and can be overridden. When it operates, its temperature can vary from 0 to 60 degrees in ambient mode.


Product Detail

Product Tags

Product Description

The GE Fanuc IC693CPU363 is a Module of GE Fanuc series 90-30 PLC systems. It connects to one of the CPU slots on a baseplate. This CPU is of type 80386X and has a speed of 25Mz. It gives the baseplate the ability to connect to up to seven remote or expansion baseplates. The power required for it to work is +5VDC and 890mA current. It has a battery to back up a clock and can be overridden. When it operates, its temperature can vary from 0 to 60 degrees in ambient mode.

GE Fanuc IC693CPU363 module has three ports. The first port supports SNP or SNPX slave on the power connector. The two other ports support SNP or SNPX master and slave, and RTU slave. It is also compatible with RTU master and CCM Modules. To support RTU master, a PCM module is needed. Connectivity is also provided by a LAN port that supports FIP, Profibus, GBC, GCM, and GCM+ modules. It also supports multidrop.

The total user memory of the GE Fanuc IC693CPU363 module is 240 kilobytes and the typical scan rate of 1 kilobyte of logic is 0.22 milliseconds. It has 2048 input (%I) and 2048 output (%Q) points. The discrete global memory (%G) of the CPU is 1280 bits. Internal Coils (%M) take a space of 4096 bits and Output or temporary Coils (%T) deploy 256 bits. System Status Referenced (%S) use 128 bits.

The Register Memory (%R) can be configured with either Logicmaster or Control v2.2. Logicmaster configures the GE Fanuc IC693CPU363 Module memory in 128 word increments up to 16,384 words. Control v2.2 can do the same configuration deploying up to 32,640 words. Analog inputs (%AI) and outputs (%Q) can be configured exactly like the Register Memory using the same programs. GE Fanuc IC693CPU363 has system registers that consist of 28 words. 

GE CPU Module IC693CPU363 (1)
GE CPU Module IC693CPU363 (2)
GE CPU Module IC693CPU363 (3)

Technical Specifications

Processor Speed : 25 MHz
I/O Points : 2048
Register Memory : 240KBytes
Floating Point Math:   Yes
32 BIT system  
Processor: 80386EX

Technical Information

CPU Type Single slot CPU module
Total Baseplates per System 8

(CPU baseplate + 7 expansion and/or remote)

Load Required from Power Supply 890  milliamps from +5 VDC supply
Processor Speed 25 MegaHertz
Processor Type 80386EX
Operating Temperature 0 to 60 degrees C (32 to 140 degrees F) ambient
Typical Scan Rate 0.22 milliseconds per 1K of logic (boolean contacts)
User Memory (total) 240K (245,760) Bytes. Actual size of available user program memory depends on the amounts configured for

%R, %AI, and %AQ configurable word memory types (see below).

Discrete Input Points - %I 2,048
Discrete Output Points - %Q 2,048
Discrete Global Memory - %G 1,280 bits
Internal Coils - %M 4,096 bits
Output (Temporary) Coils - %T 256 bits
System Status References - %S 128 bits (%S, %SA, %SB, %SC - 32 bits each)
Register Memory - %R Configurable in 128 word increments from 128 to 16,384 words with Logicmaster and from 128 to 32,640 words with Control version 2.2.
Analog Inputs - %AI Configurable in 128 word increments from 128 to 16,384 words with Logicmaster and from 128 to 32,640 words with Control version 2.2.
Analog Outputs - %AQ Configurable in 128 word increments from 128 to 16,384 words with Logicmaster and from 128 to 32,640 words with Control version 2.2.
System Registers (for reference table viewing only; cannot be referenced in user logic program) 28 words (%SR)
Timers/Counters >2,000
Shift Registers Yes
Built-in Ports Three ports.  Supports SNP/SNPX slave (on power supply connector).  On Ports 1 and 2, supports SNP/SNPX master/slave and RTU slave. Requires CMM module for CCM;  PCM module for RTU master support.
Communications LAN - Supports multidrop. Also supports Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules.
Override Yes
Battery Backed Clock Yes
Interrupt Support Supports the periodic subroutine feature.
Type of Memory Storage RAM and Flash
PCM/CCM Compatibility Yes
Floating Point Mat h Support Yes, firmware-based in firmware Release 9.0 and later.
GE CPU Module IC693CPU363 (1)
GE CPU Module IC693CPU363 (2)
GE CPU Module IC693CPU363 (3)

  • Previous:
  • Next:

  • Write your message here and send it to us