Mitsubishi AC Servo Motor HA-FH13BG

Short Description:

From the point of view of the real time operating system, it is just a function module that needs to be processed in real time.
Due to the multi function of the controller, intelligent requirements, a large number of signal processing,
Establishment and operation of various mathematical models of adaptive control,
Network communications and other functional modules will be in the real-time operation of the unified scheduling and management of the system to get the correct and reliable operation.
Therefore, the next generation of servo drive controller will be a collection of various modern control technology of the crystallization,
Instead of the traditional sense of power amplifier.
Drive unit 200VAC/400VAC level.
Motor general AC servo amplifier MELSERVO-J3 series.
Need conversion unit MR-J3-CR55K) supporting the use of.
Rated output: 45kw.

Send email to us

Product Detail

Product Tags

Product Specification

Brand	Mitsubishi
Type	AC Servo Motor
Model	HA-FH13BG
Output Power	100W
Current	1.1AMP
Voltage	89V
Net Weight	3KG
Output Speed:	3000RPM
Country of Origin	Japan
Condition	New and Original
Warranty	One year

Common Servo Motor Fault and Maintenance Knowledge

What needs to be done before starting the AC servo motor?

1. Measurement of insulation resistance (for low voltage motor should not be less than 0.5m).

2. Measure the power supply voltage, check whether the motor wiring is correct, and whether the power supply voltage meets the requirements.

3. Check whether the starting equipment is in good condition.

4. Check whether the fuse is suitable.

5. Check whether the motor is grounded and connected to the neutral line.

6, check whether the transmission device is defective.

7. Check whether the motor environment is suitable, and remove inflammables and other sundries.

Product Description

The 1746-NI8 module comes with a removable terminal block of 18 positions. For wiring, the Belden 8761 or a similar cable must be used with one or two 14 AWG wires per terminal. The cable has a maximum loop impedance of 40 Ohms at the voltage source and 250 Ohms at the current source. For troubleshooting and diagnostics, it has 9 green LED status indicators. The 8 channels have one indicator each to display the input status and one each for displaying the module status. The 1746-NI8 has a Division 2 hazardous environment standard with an operating temperature of 0 to 60 degrees Celsius.

The 1746-NI8 features Eight (8) channel analog input module compatible for used with SLC 500 Fixed or modular hardware style controllers. This module from Allen-Bradley has individually selectable voltage or current input channels. Available selectable input signals include 10V dc, 1–5V dc, 0–5V dc, 0–10V dc for Voltage while 0–20 mA, 4–20 mA, +/-20 mA for Current.
Input signals may be represented as Engineering Units, Scaled-for-PID, Proportional Counts (–32,768 to +32,767 range), Proportional Counts with User Defined Range (Class 3 only) and 1746-NI4 Data.

This Eight (8) channel module is compatible for use with SLC 5/01, SLC 5/02, SLC 5/03, SLC 5/04 and SLC 5/05 processors. SLC 5/01 may only operate as class 1 while SLC 5/02, 5/03, 5/04 are configurable for Class 1 and Class 3 operation. The channels of each module may be wired in single-ended or differential input.