Mitsubishi AC Servo Motor HA-FH33-EC-S1

Short Description:

From the vector control technology of AC servo motor, it has become more and more popular.

From the point of view of the real time operating system, it is just a function module that needs to be processed in real time.

Due to the multi function of the controller, intelligent requirements, a large number of signal processing.

Establishment and operation of various mathematical models of adaptive control.

Network communications and other functional modules will be in the real-time operation of the unified scheduling and management of the system to get the correct and reliable operation.


Product Detail

Product Tags

Specifications For This Item

Brand Mitsubishi
Type AC Servo Motor
Model HA-FH33-EC-S1
Output Power 300W
Current 1.9AMP
Voltage 129V
Net Weight 2.9KG
Output Speed: 3000RPM
Condition New and Original
Warranty One year

How to control the speed of AC servo motor?

Servo motor is a typical closed loop feedback system, driven by a motor gear group, the terminal (outputs) to drive a linear potentiometer position detection, the proportion of the potentiometer Angle coordinate transformation into - proportional voltage feedback control circuit boards, control circuit board to be compared with the control of input pulse signal, produce correct pulse, And drive the motor to rotate forward or reverse, so that the output position of the gear set is consistent with the expected value, so that the correction pulse tends to be 0, so as to achieve the purpose of accurate positioning and speed of the AC servo motor.

Mitsubishi AC Servo Motor HA-FH33-EC-S1 (4)
Mitsubishi AC Servo Motor HA-FH33-EC-S1 (3)
Mitsubishi AC Servo Motor HA-FH33-EC-S1 (2)

Product Description

Observe whether sparks are generated between the carbon brush and the commutator when the AC servo motor is running and the degree of sparks is repaired

1. There are only 2 ~ 4 small sparks, at this time if the commutator surface is flat, most cases can not be repaired.

2. No spark, no need to repair.

3. there are more than 4 small sparks, and there are 1 ~ 3 large sparks, it is not necessary to remove the armature, just use sandpaper to grind the carbon brush commutator.

4. If there are more than 4 big sparks, it is necessary to use sandpaper to grind the commutator, and the carbon brush and the motor must be removed to replace the carbon brush and grind the carbon brush.

Installation

The flange of the machine mounted with the HC-MF(HC-MF-UE)/HC-KF(HC-KF-UE)/HC-AQ/HC- MFS/HC-KFS must be connected to the earth.


  • Previous:
  • Next:

  • Write your message here and send it to us