Products By Manufacturer
-
Mitsubishi Servo Drive MR-J2S-350A
Do not attempt to install, operate, maintain or inspect the servo amplifier and servo motor until you have read through this Instruction Manual, Installation guide, Servo motor Instruction Manual and appended documents carefully and can use the equipment correctly.
Do not use the servo amplifier and servo motor until you have a full knowledge of the equipment, safety information and instructions.
-
Mitsubishi Servo Drive MR-J2S-200B
Refer to the Guide for Replacing MR-J2S/J2M Series with J4 Series ”L(NA)03093″ issued by Mitsubishi Electric, and the “Guide for Replacing.
MELSERVO-J2S Series using the MR-J2S Renewal Tool (X903120701)” available on the Mitsubishi Electric System & Service web site for replacing the MR-J2S Series with the MR-J4 Series.
-
Mitsubishi Servo Drive MR-J2S-200A
The MR-J4/MR-J3 series are available as an alternative to the MR-J2S/MR-J2M series. Please consider to replace the MR-J2S/MR-J2M series with the MR-J4/MR-J3 series. Refer to Appendix 2, Appendix 3, and the following materials for details.
-
Mitsubishi Servo Drive MR-J2S-100CL
Thank you for your continued patronage of the Mitsubishi general-purpose AC servo and FA products.
The MR-J2S/MR-J2M series has been manufactured for 14 years since its release. However, parts such as electronic components have become extremely difficult to obtain.
Therefore, the production of this series will be discontinued according to the schedule below. We ask for your understanding and cooperation of this matter.
-
Mitsubishi Servo Drive MR-J2S-100B
Do not attempt to install, operate, maintain or inspect the servo amplifier and servo motor until you have read through this Instruction Manual, Installation guide, Servo motor Instruction Manual and appended documents carefully and can use the equipment correctly. Do not use the servo amplifier and servo motor until you have a full knowledge of the equipment, safety information and instructions.
-
Yaskawa AC Servo Motor SGMAH-07DAA61D-OY
The ideal servo family for motion control. Fast response, high speed, and high accuracy.
-
Manufacturer AB Module 1746-HSRV
The Allen Bradley 1771-OBDS is a DC Current Limiting Output module, which comes with 16 outputs. Its maximum on state voltage drop is 1.5 Volts, and its maximum off state leakage current is 0.5 mA per output.
-
Manufacturer GE Analog Module IC693ALG392
IC693ALG392 is an Analog Current/Voltage Output Module for the PACSystems RX3i and Series 90-30. The module has eight single-ended output channels with voltage outputs and/or current loop outputs based on installation by the user. Each channel can be generated the configuration software for the subsequent scopes (0 to +10 volts) as unipolar, (-10 to +10 volts) bipolar, 0 to 20 milliamps, or 4 to 20 milliamps. Each of the channels is able to translate 15 to 16 bits. This is reliant on the range that is preferred by the user. All eight channels are renewed every 8 milliseconds.
-
Manufacturer GE CPU Module IC693CPU363
The GE Fanuc IC693CPU363 is a Module of GE Fanuc series 90-30 PLC systems. It connects to one of the CPU slots on a baseplate. This CPU is of type 80386X and has a speed of 25Mz. It gives the baseplate the ability to connect to up to seven remote or expansion baseplates. The power required for it to work is +5VDC and 890mA current. It has a battery to back up a clock and can be overridden. When it operates, its temperature can vary from 0 to 60 degrees in ambient mode.
-
Manufacturer GE CPU Module IC695CPU320
The IC695CPU320 is a Central Processing Unit from the GE Fanuc PACSystems RX3i Series. The IC695CPU320 has an Intel Celeron-M microprocessor rated for 1 GHz, with 64 MB of user (random access) memory and 64 MB of flash (storage) memory. RX3i CPUs are programmed and configured to control machines, processes, and material handling systems in real time.
-
Manufacturer GE Iput Module HE693RTD601
The HE693RTD601 allows RTD temperature sensors to be connected to the PLC directly without external signal processing such as transducers, transmitters, etc. All analog and digital processing on the module is performed on the HE693RTD601, and temperature values in 0.5°C or 0.5°F increments are written to the 90-30 %AI input table.
-
Manufacturer GE Module IC693ALG222
The number of channels in the IC693ALG222 may be single ended (1 to 16 channel) or differential (1 to 8 channel). The power requirement for this module is 112mA from 5V bus, and also it requires 41V from 24V DC supply to power the converters. The two LED indicators indicate the status of user power supply the module’ status. These two LEDs are MODULE OK, which gives the status regarding power-up, and POWER SUPPLY OK, which checks whether the supply is above the minimum required level. The IC693ALG222 module is configured either using logic master programming software or via Handheld programming. If the user chooses to program the module via Handheld programming, he can only edit active channels, not active scanned channels. This module uses the %AI data table to record analog signals for the use of the programmable logic controller.
