Products By Manufacturer
-
AB Touch Screen 2711P-T10C4D8
The 2711P-T10C4D8 is an Allen-Bradley PanelView 6 Plus 1000 Series terminal. The 2711P-T10C4D8 is an operator interface that allows users to monitor, manage, and display application status information. The 2711P-T10C4D8 uses modular components that allow for flexible configuration, installation, and upgrades. This factory-assembled terminal has both a display module and a logic module. As indicated by the “T” in the part number of this unit, it has a touchscreen input.
-
AB Redundancy module 1756-RM
The 1756-RM module is designed and produced by Allen-Bradley/Rockwell Automation as an industrial redundancy module and it is part of the 1756 ControlLogix product series. The 1756-RM redundancy module is used within a redundant controller system that requires two identical 1756 chassis. Each chassis must contain the same number of slots, compatible modules arranged in the same slots, a pair of additional ControlNet nodes placed on the outside of redundant chassis if the ControlNet network is used, and redundancy firmware revisions in each module. Every redundant controller system chassis contains one redundancy module like the 1756-RM module.
-
AB IO Adapter Module 1747-ASB
The Allen-Bradley 1747-ASB is a remote I/O adapter module that is part of the SLC 500 system. It establishes a communication link between SLC or PLC scanners and various 1746 I/O modules via Remote I/O. The Remote I/O link consists of one master device i.e., an SLC or PLC scanner and one or more slave devices that are adapters. The SLC or PLC image table gets I/O module image-mapping directly from its chassis. For image mapping, it supports both discrete and block transfer. The 1747-ASB has support for 1/2-slot, 1-slot, and 2-slot addressing with efficient image utilization. It is installed in the chassis with the SLC 500 processor and it scans I/O in the chassis.
-
AB Inverter 25B-D024N114
The 25B-D024N114 is an Allen-Bradley PowerFlex 525 drive that comes as a 3-phase drive. The 25B-D024N114 features a voltage of 480 Volts AC with 24 Amps of output current and it features the IP20 NEMA open type enclosure. The 25B-D024N114 comes with a standard interface module and features the frame size of D with an EMC filtering option available. The 25B-D024N114 is an easy-to-install drive that features a modular design with an embedded EtherNet/IP port and it comes with an option for the dual-port EtherNet/IP adapter that has support for the DLR functionality. The 25B-D024N114 also features the LCD human-machine interface with multiple language support. The LCD screen supports programming through a MainFree USB and the 25B-D024N114 can be configured by using connected components. The 25B-D024N114 features support for the add-on profiles for the Studio5000™ Logix Designer program allowing automatic configuration of the device through the installed program.
-
AB FAN POWER SUPPLY 20-VB00299
FAN POWER SUPPLY
POWERFLEX HIGH POWER
380-690 V
-
AB Fan 20-PP01080
Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this equipment before you install, configure, operate, or maintain this product. Users are required tofamiliarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.
-
AB Digital DC Input Module 1746-IB32
The 1746-IB32 SLC 500 24 Volt DC Digital Output Module by Allen-Bradley is a 32-point current sinking input module with 24 Volt DC input voltage with an 8-point group per common. It has a temperature-dependent sinking voltage range of 15 to 30 Volt DC at 50 degrees Celsius and 15 to 26.4 Volts DC at 60 degrees Celsius and has an overall backplane electrical rating of 0.050A at 5 Volts DC and 0.0A at 24 Volts DC respectively. The 1746-IB32 offers isolation from the backplane tested at 1500 Volts AC for 60 seconds between the backplane and the I/O and it has a 1500 Volt AC dielectric withstand. The 1746-IB32’s 32-input point is electrically-fused for protection over the external wiring and it has a maximum of a single 2.5A non-replaceable fuse per common.
-
AB Digital Contact Output Module 1746-OW16
The Allen-Bradley 1746-OW16 is an Allen-Bradley discrete output module used with SLC 500 product family. This module is a relay output module or sometimes referred as dry contact output module.
-
AB Backup Scanner Module 1747-BSN
The Allen-Bradley 1747-BSN is a backup scanner module. The 1747-BSN backup scanner is available with redundancy for remote I/O (RIO). The 1747-BSN is equipped with RS-232 channel switching for communication with devices such as operator interfaces. This module also has a DH+ link. This module is a set of complementary modules, with one module located in the main system and other modules in the secondary or backup system. The main module controls all the remote I/O operations.
-
AB Analog RTD Module 1756-IR6I
The Allen-Bradley 1756-IR6I is a temperature-measuring analog module. This is an analog module that is used with Resistance-Temperature Detectors (RTD) sensors.
-
AB AC Power Supply Module 1756-PA72
The Allen-Bradley 1756-PA72 Standard AC Power Supply is part of the ControlLogix power supply series. The 1756-PA72 comes with 120 to 240 Volts AC nominal input voltage. The input frequency range of the 1756-PA72 is 47 to 63 Hertz. The maximum input power of this device is 100VA/100 Watts and the maximum output power is 75 Watts at 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). The 1756-PA72 has a power consumption of 25 Watts at 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). This power supply has a power dissipation of 85.3 BTU/hour and a power supply with a maximum inrush current of 20 A. The Allen-Bradley 1756-PA72 provides built-in overcurrent protection.
-
Yaskawa AC Servo Motor SGMAH-04AAA61D-OY
The ideal servo family for motion control. Fast response, high speed, and high accuracy.
