Products By Type
-
Mitsubishi Servo Drive MR-J3-10B-RJ027U587
Refer to the Guide for Replacing MR-J2S/J2M Series with J4 Series ”L(NA)03093″ issued by Mitsubishi Electric, and the “Guide for Replacing.
MELSERVO-J2S Series using the MR-J2S Renewal Tool (X903120701)” available on the Mitsubishi Electric System & Service web site for replacing the MR-J2S Series with the MR-J4 Series.
-
Mitsubishi Servo Drive MR-J2S-700CL
The MR-J4/MR-J3 series are available as an alternative to the MR-J2S/MR-J2M series. Please consider to replace the MR-J2S/MR-J2M series with the MR-J4/MR-J3 series. Refer to Appendix 2, Appendix 3, and the following materials for details.
-
Mitsubishi Servo Drive MR-J2S-350B
Do not attempt to install, operate, maintain or inspect the servo amplifier and servo motor until you have read through this Instruction Manual, Installation guide, Servo motor Instruction Manual and appended documents carefully and can use the equipment correctly. Do not use the servo amplifier and servo motor until you have a full knowledge of the equipment, safety information and instructions.
-
Mitsubishi Servo Drive MR-J2S-350A
Do not attempt to install, operate, maintain or inspect the servo amplifier and servo motor until you have read through this Instruction Manual, Installation guide, Servo motor Instruction Manual and appended documents carefully and can use the equipment correctly.
Do not use the servo amplifier and servo motor until you have a full knowledge of the equipment, safety information and instructions.
-
Mitsubishi Servo Drive MR-J2S-200B
Refer to the Guide for Replacing MR-J2S/J2M Series with J4 Series ”L(NA)03093″ issued by Mitsubishi Electric, and the “Guide for Replacing.
MELSERVO-J2S Series using the MR-J2S Renewal Tool (X903120701)” available on the Mitsubishi Electric System & Service web site for replacing the MR-J2S Series with the MR-J4 Series.
-
Mitsubishi Servo Drive MR-J2S-200A
The MR-J4/MR-J3 series are available as an alternative to the MR-J2S/MR-J2M series. Please consider to replace the MR-J2S/MR-J2M series with the MR-J4/MR-J3 series. Refer to Appendix 2, Appendix 3, and the following materials for details.
-
Mitsubishi Servo Drive MR-J2S-100CL
Thank you for your continued patronage of the Mitsubishi general-purpose AC servo and FA products.
The MR-J2S/MR-J2M series has been manufactured for 14 years since its release. However, parts such as electronic components have become extremely difficult to obtain.
Therefore, the production of this series will be discontinued according to the schedule below. We ask for your understanding and cooperation of this matter.
-
Yaskawa AC Servo Motor SGMAH-07DAA61D-OY
The ideal servo family for motion control. Fast response, high speed, and high accuracy.
-
Siemens AC power supply 6ES7212-1BB23-0XB0
SIMATIC S7-200, CPU 222 Compact unit, AC power supply 8 DI DC/6 DO relay 4 KB progr./2 KB data, PROFIBUS DP expandable.
-
Siemens PLC Module 6ES7231-0HC22-0XA0
SIMATIC S7-200, Analog input EM 231, only for S7-22X CPU, 4 AI, 0-10V DC, 12 bit converter.
-
Siemens PLC Module 6FC5357-0BB34-0AE1
SINUMERIK 840D/DE NCU 573.4, 650MHZ, 64MB (W/O FAN BOX) W/O SYSTEM SOFTWARE MEMORY: NC 2,5 MB, PLC 96 KB PREP. PROFIBUS-DP.
-
Rosemount 1151DPS22DFB4P1Q4Q8 TRANSMITTER NEW
A transmitter is a converter that transforms the output signal of a sensor into a signal that can be recognized by a controller (or a signal source that converts non-electric energy input from a sensor into electrical signals and at the same time amplifies the transmitter for remote measurement and control).
The sensor and transmitter together constitute an automatically controlled monitoring signal source. Different physical quantities require different sensors and corresponding transmitters, such as industrial thermostat controller has specific sensor and transmitter.
