Servo Drive
-
Mitsubishi Servo Drive MR-J3-500B-RJ027U508
The MR-J4/MR-J3 series are available as an alternative to the MR-J2S/MR-J2M series. Please consider to replace the MR-J2S/MR-J2M series with the MR-J4/MR-J3 series. Refer to Appendix 2, Appendix 3, and the following materials for details.
-
Mitsubishi Servo Drive MR-J3-200B-RJ027U506
This document describes the changes that are applied when replacing a system using the MR-J2S series to a system using the MR-J4/J3 series. The functions and performance of the MR-J4/J3 series are much higher when compared to the MR-J2S series.
-
Mitsubishi Servo Drive MR-J3-10B-RJ027U587
Refer to the Guide for Replacing MR-J2S/J2M Series with J4 Series ”L(NA)03093″ issued by Mitsubishi Electric, and the “Guide for Replacing.
MELSERVO-J2S Series using the MR-J2S Renewal Tool (X903120701)” available on the Mitsubishi Electric System & Service web site for replacing the MR-J2S Series with the MR-J4 Series.
-
Mitsubishi Servo Drive MR-J2S-700CL
The MR-J4/MR-J3 series are available as an alternative to the MR-J2S/MR-J2M series. Please consider to replace the MR-J2S/MR-J2M series with the MR-J4/MR-J3 series. Refer to Appendix 2, Appendix 3, and the following materials for details.
-
Mitsubishi Servo Drive MR-J2S-350B
Do not attempt to install, operate, maintain or inspect the servo amplifier and servo motor until you have read through this Instruction Manual, Installation guide, Servo motor Instruction Manual and appended documents carefully and can use the equipment correctly. Do not use the servo amplifier and servo motor until you have a full knowledge of the equipment, safety information and instructions.
-
Mitsubishi Servo Drive MR-J2S-350A
Do not attempt to install, operate, maintain or inspect the servo amplifier and servo motor until you have read through this Instruction Manual, Installation guide, Servo motor Instruction Manual and appended documents carefully and can use the equipment correctly.
Do not use the servo amplifier and servo motor until you have a full knowledge of the equipment, safety information and instructions.
-
Mitsubishi Servo Drive MR-J2S-200B
Refer to the Guide for Replacing MR-J2S/J2M Series with J4 Series ”L(NA)03093″ issued by Mitsubishi Electric, and the “Guide for Replacing.
MELSERVO-J2S Series using the MR-J2S Renewal Tool (X903120701)” available on the Mitsubishi Electric System & Service web site for replacing the MR-J2S Series with the MR-J4 Series.
-
Mitsubishi Servo Drive MR-J2S-200A
The MR-J4/MR-J3 series are available as an alternative to the MR-J2S/MR-J2M series. Please consider to replace the MR-J2S/MR-J2M series with the MR-J4/MR-J3 series. Refer to Appendix 2, Appendix 3, and the following materials for details.
-
Mitsubishi Servo Drive MR-J2S-100CL
Thank you for your continued patronage of the Mitsubishi general-purpose AC servo and FA products.
The MR-J2S/MR-J2M series has been manufactured for 14 years since its release. However, parts such as electronic components have become extremely difficult to obtain.
Therefore, the production of this series will be discontinued according to the schedule below. We ask for your understanding and cooperation of this matter.
-
Yaskawa Servo Drive SJDE-04APA-OY
Junma used the world’s premier servo technology to provide unmatched performance with a quick and efficient setup. The pulse input interface made it very easy to upgrade machines using stepper techology. Junma’s compact size and efficiency produced 7 times the power of a comparable size stepper system during acceleration dramatically increasing machine cycle times.
-
Yaskawa Servo Drive SGDM-20AC-SD1
The Yaskawa SGDM Sigma II Series Servo Amplifier is the ultimate servo solution for your automation needs. A single platform covers 30 watts to 55 kW and input voltages of 110, 230 and 480 VAC. The Sigma II amplifier can be set to torque, speed, or position control. A single-axis controller and a variety of network interface modules can be attached to the amplifier for the utmost flexibility.
